 |
|
|
|
|
|
|
|
|
|
|
|
 |
|||||||||||
 |
 |
 |
 |
||||||||
 |
 |
 |
 |
 |
 |
||||||
 |
Home -> Specifications Sample Specification | Applications | Moisture Resistance | Appearance | Flame and Smoke Ratings | Specification Compliance | Physical Properties All chill and heating hot water valves must be insulated with a factory fabricated removable/reusable valve cover. Cover must be fabricated of 1" close cell elastomeric insulation, complete with Velcro closures as manufactured by Corick, Baton Rouge, Louisiana. All chill and heating hot water pumps must be insulated with a factory fabricated removable/reusable pump cover. Cover must be fabricated of 1" close cell elastomeric insulation complete with Velcro closures as manufactured by Corick, Baton Rouge, Louisiana. Corick Removable/Reusable Insulation Valve Covers are specially designed for use on Chill Water, Heating Hot Water, and Domestic Water valves and equipment. When properly installed Corick Removable/Reusable Insulation Valve Covers effectively retard heat gain, and prevent condensation or frost formation on cold equipment. They also effectively retard heat loss when used on hot equipment. Corick Removable/Reusable Insulation Valve Covers closed cell structure is in it's self a vapor barrier, but under continuous conditions of high humidity (tropical conditions) additional vapor barrier protection is recommended. Corick Removable/Reusable Insulation Valve Covers smooth surface forms a neat finished. No jacketing is needed on most indoor installations, but jacketing is required for weather protection outdoors. Elastomeric thermal insulations in 1/2" and 1"
thickness Elastomeric thermal insulations UL 94-%V Flammability Classification (Recognition
No. E55475) Meets requirements of ASTM C-411 (Test Method for Hot Surface Performance of High Temperature Thermal Insulation) Meets requirements of UL 181 sections 11.0 and 16.0 MIL-P-15280, Form S Elastomeric thermal insulation
|
 |
|||||||||
 |
 |
||||||||||
 |
|||||||||||
 |
 |
 |
|||||||||
 |
|||||||||||